Z-SAW Kataba Kataba Cross Fine H-225 Replacement Saw Blade

Z-SAW Kataba Cross Fine H-225 Replacement Saw Blade

Saw blade is suitable for the Kataba Cross Fine H-225 from Z-SAW.

High quality replacement saw blade for the Kataba Cross Fine Japanese saw from ZETSAW. If the teeth of your Kataba Cross Fine Japanese saw become blunt and no longer saw properly, an early replacement is recommended to make the work smooth again and to avoid unclean saw cuts. Especially with the fine saw blades where the fine cut is particularly important, you should pay attention to a sharp blade. Translated with www.DeepL.com/Translator (free version)

Saw blade for Japanese saw Kataba Cross Fine

• The teeth of the saw blade are impulse hardened and durable.
• Blade length 225 mm
• Blade width 60 mm
• Blade thickness 0,4 mm
• Cutting width 0,56 mm
• Tooth pitch 1.2 mm
• Made in Japan

Changing the saw blade

1. When changing the saw blade of the Japanese saw, Z-Saw recommends wearing protective goggles and gloves.
2. Cover the blade you want to change with a soft cloth so that the teeth cannot hurt you.
3. Gently tap the back of the Japanese saw with the handle on a hard surface so that the blade comes off downwards. Now you can remove it without any problems.
4. Insert the replacement saw blade into the back, and hook it onto the pivot point.
5. Again, wrap the blade with a soft cloth to protect it and tap the handle of the Kataba Cross Fine against a hard surface to hold the blade in place.
6. Important! Never knock the saw blade on the ground, otherwise it can be damaged!