Z-SAW Dozuki Hardwood 150 P 1.2 replacement blade for Japanese saw

Z-SAW Hardwood Dozuki 150 P 1.2 Replacement Saw Blade

Saw blade is suitable for the following Z-SAW Japanese saws:

• Dozuki hard wood 150 P1.2
• Dozuki fine 150 P1.0
• Dozuki Piercing 150 P1.141
• Note that if you use a saw other than the Dozuki Hard Wood, the use of the saw will change!

High quality replacement blade for the Japanese Dozuki Hardwood saw from ZETSAW.

If the teeth of your Dozuki hardwood Japanese saw become dull and no longer saw properly, an early replacement is emfpommended to make the work smooth again and avoid unclean saw cuts.

Saw blade for Japanese saw Dozuki Hardwood

• The teeth of the saw blade are impulse hardened and durable.
• Blade thickness 0,3mm
• Pitch 1,2mm
• Possible sawing depth 38mm
• Made in Japan

Change saw blade

1. To change the saw blade of the Japanese saw, Z-Saw recommends wearing safety glasses and gloves.
2. Gently tap the back of the blade tip, with the teeth facing up, to loosen the old saw blade. Now you can easily remove it.
3. Insert the replacement saw blade into the back, and hook it onto the pivot point.
4. Tap the back of the Japanese saw on a smooth and clean surface with the teeth facing up to hold the saw blade in place.