Titanium file VALTITAN FRIEDR. DICK flat 150/3 cut 3 (S2)

Titanium file Valtitan Titanium file flat 150/3 cut 3

• Type titanium file Valtitan titanium file flat
• Cut 3 - German cut
• Cut 2 - Swiss cut! (Swiss cut is shown on the files 2)
• Length 150mm
• Width 18,5 mm
• Thickness 4,0 mm
• Friedr. Dick
• T1112153-S2
• Made in Switzerland

This titanium file Valtitan Titanium file flat 150/3 from Friedr. Dick with a length of 150 mm and cut 3. For hardened metals, this flat titanium file is perfect the Perfect file. The flat file comes from the factory of Vallorbe and is a flat file for professionals.

Titanium file from Friedr. Dick with cut 3

The titanium file Valtitan Titanium file flat cut 3 from Friedr. DICK are coated with a special surface coating to achieve a surface hardness of 72 HRc. This makes these files suitable for processing particularly hard materials. No clogging of the haft and a simple tapping out is sufficient to free the teeth from chips.

Due to the coating, titanium file Valtitan titanium file flat cut 3 resist the rust-forming influences and have an increased service life compared to conventional files.

Titanium files are also available as needle files. The extra hard titanium files are designed for machining hard materials that are difficult to machine such as stainless steel, titanium, molybdenum and nickel alloys, certain steel alloys, ferrotic, polyester, copper/tungsten alloys, resocel, poly-amide, acrylic, etc.

VALLORBE & Friedr. DICK made in Swizerland

Vallorbe & Friedr. Dick titanium file Valtitan titanium file flat are known among as the highest quality files. These titanium files are manufactured in the Jura Arc in Switzerland and are highly valued by the most demanding end users worldwide.The high quality files are aimed at luthiers/wood instrument makers who want to have high performance, long lasting tools of the highest quality.