Bernstein Spannfix 4.0 Ball joint holder ✓ Screwing on

Bernstein SPANNFIX 4.0 Table Ball joint holder with threaded spigot for screwing on, threaded spigot M12 x 1.5 x 25 mm, steel ball Ø 60 mm

9-294

Bernstein Ball-and-socket joint holder SPANNFIX 4.0 Foot part for screwing on

• screwing on Ball-and-socket joint quick clamp for heavy parts
• 360° rotatable, infinitely adjustable
• Quality product 100% Made in Germany
• For screwing onto the workbench (space dimensions: 152x151mm)
• threaded pin M12 x 1,5 x 25 mm
• mounting surface approx. Ø 36 mm
• inclination angle +/-45
• Included in delivery:
• Snorr washer and lock nut
• Lock nut for the thread
• Cast aluminium, powder coated, dark grey metallic
• Weight 1900 g
• Brand: Bernstein
  

Range of application of the SPANNFIX 4.0

The ball joint holders are available in different ball diameters, which have different holding forces. A small lever pressure is sufficient for stepless fixing with high holding force. The base can be selected for clamping, for fixed screwing or with screwed-in high-performance magnets. A quick clamp for optimal alignment of cameras, monitors, sensors or measuring devices. In woodworking, carving plates, carving balls or various clamping and holding tools are used. In instrument and model making, a wide variety of clamping and holding devices are screwed on. Suitable adapters and extensions of all kinds can be screwed on via the thread on the ball. An optimal hold for repairing e-scooters, e-bikes and bicycles in a free-floating manner. Universities, research centres and laboratories have appreciated the versatile application and use possibilities for years. The clamp-on attachment is suitable for workbenches with a maximum tabletop thickness of up to 80 mm. The screw-on attachment can be connected to workbenches, tables and base plates via the four 9 mm through holes. The high-performance magnets offer individual attachment, which can also be changed quickly. Translated with www.DeepL.com/Translator (free version)

Technical product description of the table ball joint holder SPANNFIX 4.0 by Bernstein

• Connection thread M12 x 1.5 mm (special thread) please ask directly for suitable adapters
• Maximum torque: ball Ø 40 mm approx. 24 Nm, ball Ø 60 mm approx. 100 Nm
• Holding forces of the ball at the height of the threaded pin: ball-Ø 40 mm approx 45 kg (441N), ball-Ø 60 mm approx140 kg (1,372N).
• Degreasing the ball increases the clamping force. Screw-on foot: plate size 152 x 151 mm, through holes 4 x 9 mm
• Aluminium cast parts powder-coated
• Steel parts chrome-plated, rustproof
• The adjustment screw on the lower seat of the ball allows the ball to be adjusted from loose to very tight.

Please note for safety-relevant parts that we cannot give a guarantee of the holding forces without knowing your specific application. The ball may behave differently under different physical conditions than it does in our test laboratory in an optimal test environment.