VERITAS Micro-Adjust Wheel Marking Gauges & replacement blade, 05N3521

VERITAS Micro-Adjust Wheel Marking Gauges with fine adjustment and mm scale with round weel cutter for wood 05N3521

VERITAS Micro-Adjust Wheel Marking Gauges with fine adjustment and mm scale

This gauge from Veritas with a working range from 0mm to 150mm and a scale in mm can be fine-tuned with a double locking technology and an adjustment range of up to 5mm. On the one hand, you have the advantage of precise readability with simultaneous fine adjustment. The guide rod consists of solid stainless steel on which the scale is etched. The stop is made of brass, while the body with a shaft diameter of 7.92 mm (5/16 inch) was made of aluminum.

Micro-Adjust Wheel Marking Gauges with Round blade

The gauge from VERITAS has a round knife blade that is ground on one side. Even on end grain or a problematic wood grain with unfavorable fibers can be scored or marked precisely and cleanly. The marking wheel can be safely lowered into the brass plate when not in use. This prevents injuries and protects the wheel at the same time. The guide rod is smooth and precise even after frequent use.

• Hardened steel wheel
• Wheel's single-sided bevel pulls gauge face against stock, maintaining accuracy
• Wheel retracts into gauge face for storage and protection
• Internal O-ring keeps light but constant friction on rod
• Gauge fitted with two-stage collet; allows micro-adjustment of cutting wheel
• Made in Canada
• Patented