SHINTO Saw Rasp SR-20 | Japanese rasp
Description
Original Shinto saw rasp long from Japan
- Saw rasp
- Shinto
- SR-20
- Blade length 280 mm
- Tooth pitch coarse side 1 mm
- Tooth pitch fine side 2.5 mm
- With wooden handle
- Made in Japan
Special features of the Japanese rasps
With these special Japanese rasps, 10 Japanese saw blades are arranged in a zigzag diamond pattern and riveted together. The large spacing of the grid arrangement allows very good material removal so that this sharp Shinto saw rasp does not become clogged. In addition to using wood, this rasp is also suitable for soft metals, gibs or plastic.
Shinto Japanese saw rasps
Another advantage of these Shinto Japanese rasps is that the teeth of the saw rasp extend seamlessly to the edge. Compared to conventional rasps, where the cut usually does not reach that point, Shinto rasps allow you to work in the edge area with the same yield as in the middle area.
Original Shinto Saw Rasp SR-20
The Saw Rasp has a coarse side with a tooth pitch of 1 mm and a fine side with a tooth pitch of 2.5 mm. This means that you can easily vary between coarse and fine stock removal. The Shinto saw rasp SR-20 has a blade length of 280 mm with a fixed handle.