• Worldwide shipping
  • Fast DHL shipping
  • Location Germany
  • Satisfied customers in 43 countries
  • Service: +49 (0) 8074 91 72 42 1
  • Worldwide shipping
  • Fast DHL shipping
  • Location Germany
  • Satisfied customers in 43 countries
  • Service: +49 (0) 8074 91 72 42 1

SHINTO Saw Rasp SR-10 | Japanese rasp

21.28 €

incl. VAT, plus delivery
Not in stock
Delivery time: ca. 3-10 day(s)

Description

Original Shinto saw rasp short from Japan

  • Saw rasp
  • Shinto
  • SR-10
  • Blade length 228 mm
  • Tooth pitch coarse side 1 mm
  • Tooth pitch fine side 2.5 mm
  • With wooden handle
  • Made in Japan

Special features of the Japanese rasps

With these special Japanese rasps, 10 Japanese saw blades are arranged in a zigzag diamond pattern and riveted together. The large spacing of the grid arrangement allows very good material removal so that this sharp Shinto saw rasp does not become clogged. In addition to using wood, this rasp is also suitable for soft metals, gibs or plastic.

Shinto Japanese saw rasps

Another advantage of these Shinto Japanese rasps is that the teeth of the saw rasp extend seamlessly to the edge. Compared to conventional rasps, where the cut usually does not reach that point, Shinto rasps allow you to work in the edge area with the same yield as in the middle area.

Original Shinto Saw Rasp SR-10

The Saw Rasp has a coarse side with a tooth pitch of 1 mm and a fine side with a tooth pitch of 2.5 mm. This means that you can easily vary between coarse and fine stock removal. The Shinto saw rasp SR-10 has a blade length of 228 mm with a fixed handle.