• Worldwide shipping
  • Fast DHL shipping
  • Location Germany
  • Satisfied customers in 43 countries
  • Service: +49 (0) 8074 91 72 42 1
  • Worldwide shipping
  • Fast DHL shipping
  • Location Germany
  • Satisfied customers in 43 countries
  • Service: +49 (0) 8074 91 72 42 1
SCHILBACH Restoration Extra (glue) (250g)

SCHILBACH Restoration Extra (glue) (250g)

(1 kg = 77.60 €)

19.40 €

incl. VAT, plus delivery
In stock
Delivery time: ca. 3-10 day(s)

Description

The glue for your restoration

While gluing stringed instruments during the restoration process, it is particularly important that you can 100% rely on the performance of the glue while it is invisible to the eye. The hide glue that is used must remain neutral during priming, varnishing and retouching and guarantee a clean, non-color-modified joint.

Transparent and strong glue

This high-quality animal warm glue for restorations is also perfect for paper restoration, the repair of old books, parchment paper, handmade paper and historical documents.

In cooperation with one of the world's leading producers of technical gelatin and animal-based glue, we have added to our portfolio Restoration Extra specifically for high quality restoration requirements. This glue is extremely clear, of the highest purity, and has extraordinary adhesive properties. Thanks to our adept partner we can guarantee a consistently high and reliable quality.

Technical characteristics of the gelatine

  • Extremely clear
  • Highly pure
  • Extraordinary adhesive properties
  • Gel strength> = 250g Bloom
  • Viscosity 4.00-4.70mPas
  • PH* 4.90.-5.20
  • Transmission** 620nm> = 92%
  • Transmission** 450nm> = 78%
  • Supplied in resealable, air-tight PET plastic container
  • Measuring spoon included

Informaitons about hide glue

> Hide Glue, Gelatines & Co. <


> Recommended use of Hide Glue<


In order to become familiar with the handling, it is recommended to perform a gluing test before use. The glue concentration depends on the desired strength and processing time during application. Usually, glue concentrations in the range of 1% -20% are used. We recommend always keeping the glue fresh.

  1. The glue preparation procedure begins with the initial swelling process. The granules are able to absorb five to ten times their weight in cold water. Place the glue granules in to a heat-resistant glass jar, to this, add cold, distilled water so that the water is about 1/3 of the volume above the glue granules.
  2. Allow the glue to stand for 1 to 2 hours until all the granules are swollen.
  3. To dissolve the swollen glue, place the jar in to a water bath at 50-70°C. In order to prevent the incorporation of air, do not stir initially, but only when a large proportion of the granules are dissolved. (The temperature of the liquid glue can maintained between 50-60°C. At these temperatures, the glue can be kept liquid for several hours without large losses of gel strength.)
  4. Allow the glue to cool and completely gel.
  5. Before application, the second melting in the water bath can create a skin and absorbed air in the form of foam on the surface, remove this with a brush. At temperatures of 50-60°C, the glue can be kept liquid for several hours without any loss of gel strength and is now suitable for complicated crack repair and glue joints. At temperatures above 60°C, the glue will increasing lose viscosity and gel strength.
  6. The ideal processing room temperature is between 25°C-35°C. In general, the cooler, the shorter the processing period. If the glue is applied too quickly or begins to thicken we recommend increasing the glue temperature to 60°C. A hand warm temperature of the spot to be glued can also prove to be helpful. Infrared heaters extend the processing time.


* The pH is a measure of the acidic or basic character of an aqueous solution.

** Light transmittance